Contact Us

Use the form on the right to contact us.

You can edit the text in this area, and change where the contact form on the right submits to, by entering edit mode using the modes on the bottom right. 

101 Roblar Drive suite C
Novato, CA, 94949

(415) 883-7300

Milwaukee pH55 pH & Temperature Meter

Measuring and Testing

Milwaukee pH55 pH & Temperature Meter

ph meter.jpg
ph meter.jpg

Milwaukee pH55 pH & Temperature Meter

69.99

Range:0 to 32 °Brix
1.000 to 1.130 SG

Resolution:0.2 °Brix
0.001 SG

Accuracy:±0.1 °Brix
±0.001 SG

Temperature
Correction:Automatic 10 to 30 °C
(50 to 86 °F)

Refractometers are excellent tools to determine the density of unfermented wort or must, providing quick and accurate readings with only a few drops of sample fluid. This handheld version is packed with features to make it perfect for both brewers and winemakers. The refractometer reports measurements in both °Brix and Specific Gravity, and automatically compensates for temperature. The display has an adjustable focus lens, so there is no need to try and look through the eyepiece while wearing glasses. It is made of durable, lightweight materials, and comes with a protective, hard-shell case, a drop applicator, and a screwdriver in case manual calibration is desired.

Since alcohol affects the refractive properties of liquids, the refractometer can only be used on unfermented wort or must, or other sugar solutions. Final gravity (density after fermentation) must be calculated, rather than measured directly.

Recommended
UsagePosition yourself under a light source. Rotate the eyepiece to bring the display into focus. Apply 2-3 drops onto the prism face, close the cover, and view through the eyepiece. After each use, clean the prism face, cover, and drop-applicator with water to ensure a pure sample on next use. If a drying cloth is used on the prism face, make sure it is non-abrasive and lint free.

Add To Cart